View DS1811_152821.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DS1811 5V EconoReset with Open Drain Output
www.dalsemi.com
FEATURES
Automatically restarts a microprocessor after power failure Maintains reset for 150 ms after VCC returns to an in-tolerance condition Reduces need for discrete components Precision temperature-compensated voltage reference and voltage sensor Low-cost TO-92 or space saving SOT-23 packages available Efficient open-drain output with internal 5.5 k pull-up resistor Operating temperature -40C to +85C
PIN ASSIGNMENT
3
1 2 SOT-23 PACKAGE
123
123 TO-92 PACKAGE See Mech. Drawings Section
PIN DESCRIPTION TO-92
1 2 3
RST
VCC GND
Active Low Reset Output Power Supply Ground
SOT-23
1 2 3
RST
VCC GND
Active Low Reset Output Power Supply Ground
DESCRIPTION
The DS1811 EconoReset uses a precision temperature reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces reset to the active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for approximately 150 ms to allow the power supply and processor to stabilize. 1 of 5 111999
DS1811
OPERATION - POWER MONITOR
The DS1811 provides the functions of detecting out-of-tolerance power supply conditions and warning a processor-based system of impending power failure. When VCC is detected as out-of-tolerance, the RST signal is asserted. On power-up, RST is kept active for approximately 150 ms after the power supply has reached the selected tolerance. This allows the power supply and microprocessor to stabilize before RST is released.
BLOCK DIAGRAM (OPEN-DRAIN OUTPUT) Figure 1
APPLICATION EXAMPLE Figure 2
2 of 5
DS1811
TIMING DIAGRAM: POWER-UP Figure 3
TIMING DIAGRAM: POWER-DOWN Figure 4
3 of 5
DS1811
ABSOLUTE MAXIMUM RATINGS*
Voltage on VCC Pin Relative to Ground Voltage on RST Relative to Ground Operating Temperature Storage Temperature Soldering Temperature * -0.5V to +7.0V -0.5V to VCC +0.5V -40C to +85C -55C to +125C 260C for 10 seconds
This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.
RECOMMENDED DC OPERATING CONDITIONS
PARAMETER Supply Voltage SYMBOL VCC MIN 0.0 TYP MAX 5.5
(-40C to +85C)
UNITS V NOTES 1
DC ELECTRICAL CHARACTERISTICS
PARAMETER Output Current @ 0.4 volts Operating Current VCC < 5.5 volts VCC Trip Point (DS1811-5) VCC Trip Point (DS1811-10) VCC Trip Point (DS1811-15) Internal Pull-Up Resistor Output Capacitance SYMBOL IOL ICC VCCTP VCCTP VCCTP RP COUT
(-40C to +85C; VCC=1.2V to 5.5V)
MIN +10 30 4.50 4.25 4.00 3.5 4.62 4.35 4.13 5.5 40 4.75 4.49 4.24 7.5 10 TYP MAX UNITS mA A V V V k pF NOTES 2, 3 4 1 1 1
AC ELECTRICAL CHARACTERISTICS
PARAMETER RESET Active Time VCC Detect to RST VCC Slew Rate (VCCTP (MAX) to VCCTP (MIN)) VCC Slew Rate (VCCTP (MIN) to VCCTP (MAX)) VCC Detect to RST SYMBOL tRST tRPD tF tR tRPU
(-40C to +85C; VCC=1.2V to 5.5V)
MIN 100 300 0 100 150 300 TYP 150 2 MAX 300 5 UNITS ms s s ns ms 5 NOTES
4 of 5
DS1811
NOTES:
1. All voltages are referenced to ground. 2. Measured with VCC 2.7 volts. 3. A 1k=external resistor may be required in some applications for proper operation of the microprocessor reset control circuit. 4. Measured with RST output open. 5. tR = 5 s.
PART MARKING CODES
"A", "B", &"C" represent the device type. 810 . . . . DS1810 811 . . . . DS1811 812 . . . . DS1812 813 . . . . DS1813 815 . . . . DS1815 816 . . . . DS1816 817 . . . . DS1817 818 . . . . DS1818
"D" represents the device tolerance. A . . . . . . 5% B . . . . . . 10% C . . . . . . 15% D . . . . . . 20%
5 of 5

▲Up To Search▲

Price & Availability of DS1811

	To Download DS1811 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .